How to flash Gionee devices Via WiseLink Flash Tool:

Update Gionee devices Via WiseLink Flash Tool:

1- Run WiseLink _Tool.exe & choose No Register Login then click on OK.

2- Now click on 3 Dots & browse and locate the Gionee Scatter file you download it

  • You’ll find it in the folder where you extracted the ROM files.

3- Connect your Gionee mobile:

  • Turn off your device.
  • Remove the battery (if removable)
  • Connect your Gionee device to your computer via USB cable.

4- Click on Download Button

5- The flash process automatically starts, wait for flashing to be complete before disconnecting

6- That’s it, a window appears Download finished, your Gionee devices are ready to use.


Update Gionee Devices Via SP FlashTool:

1- Run Flash_tool.exe:

2-Click on Download Agent, find and locate the download agent File (it should be in the flash tool folder) and press Open.

3-Click on Scatter-loading, find and locate the Firmware Gionee Scatter File and press Open.

4-Now click on Download button.

5- Connect your Gionee mobile:

  • Turn off your device.
  • Remove the battery (if removable)
  • Remove Sim card and SD card to prevent data loss
  • Connect your Gionee to your computer via USB cable.

6-You ‘ll see this info and the flash process automatically starts:

7-The flashing process might take some time to complete.

8-That’s it ! you have successfully Update Gionee Stock Rom.


Update Gionee device Via QFIL:

1- Extract Qualcomm Flasher Qfil files & Run QcomDLoader:

2- Now Check Rat Build & Click on Browse to Choose MBN File.

3- Go To  Load XML, & select rawprogramunsparse.xml and Select Patch0.xml

XML file comes with two option:

  • rawprogram_unsparse_without_qcn.xml : On choosing this file, data will not be lost.
  • rawprogram_unsparse.xml : Will lose RF Calibration data, IMEI and WiFi/Bluetooth Address.
  • Now power off your Gionee mobile.
  • Press and hold volumes button together
  • Connect your Gionee Mobile via USB cable
  •  Click on Download to start flashing.

4- Once Finish Download appears, Disconnect your Gionee device from the USB cable.

5- That’s all! you have successfully Update your Gionee Devices via QFIL tool.

To download stock firmware click HERE

Leave A Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.